A1 Controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$226
U – Automation and security firmware
U – firmware automation and security for A1 controller supports automation, burglary/fire alarm, and access control. Peripheral equipment connects via Data Addressable Bus (LMICRO) with 32 addresses. Users can configure various functions and reactions. Remote monitoring is enabled with a dual communication channel. The firmware manages main/battery supply operation control. Event logging is stored in […]
$383
LUX 64/3000 Octagram Flex
"Octagram Flex": a comprehensive network version software equipped with an MS Access database. This robust solution supports up to 64 controllers and accommodates a workforce of up to 3000 employees.
$1085
DP Firmware for Door with key + PIN code ACS
Overview of D Firmware for Door, Barrier or Gate with key + PIN code Access Control SystemsThe D firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.When a valid access card have presented and PIN code enter, the lock immediately releases, the green indicator light on the […]
$53
DD Firmware for 2 Doors ACS
Overview of DD Firmware for 2 Doors, 2 Barriers or 2 Gates Access Control SystemsThe DD firmware writes (usually at the factory) in A1 controller and manages the 2 electromagnetic locks installed on the 2 door.When a valid access card have presented, the lock immediately releases, the green indicator light on the reader then illuminates, […]
$62
A1H controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$615
A1HT controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$615
A1U Controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$609
MDC – 2 contacts control, built-in reed switch and transistor output driver.
The module has 2 inputs, a built-in reed switch. MDC manage a load by transistor switch (U = 36 V DC, I = 4 A, short-circuit protection). The module has a built-in shunt diode for protection against reverse currents of the electromagnetic lock and electromagnet.
$39
DU Firmware for motor lock access point.
Overview of DU Firmware for Motor Lock Access Point.The DU firmware downloads (usually at the factory) in A1 controller and manages the motor lock for pass point.When a valid access key have presented, the motor lock start rotate, the green indicator light on the reader then illuminates, and an intermittent signal sounds. There will be a […]
$89
DS Firmware for Door ACS with Passage Blocking
Overview of DS Firmware for Door, ACS with Passage BlockingThe DS firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.A1 (with DS firmware) blocks door passage when the C2 and GND contacts are closed.The same function can be implemented by DQ firmware.When a valid access card […]
$63
A1DSB controller for Door ACS with Passage Blocking
Overview of DSB controller for Door, ACS with Passage BlockingThe DS firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.A1 (with DSB firmware) blocks door passage when the C2 and GND contacts are closed.The same function can be implemented by DQ controller .When a valid access […]
$497
A1DS controller for Door ACS with Passage Blocking
Overview of DS controller for Door, ACS with Passage BlockingThe DS firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.A1 (with DS firmware) blocks door passage when the C2 and GND contacts are closed.The same function can be implemented by DQ controller .When a valid access […]
$289
A1DUB controller for motor lock access point.
Overview of DUB controller for Motor Lock Access Point.The DUB firmware downloads (usually at the factory) in A1 controller and manages the motor lock for pass point.When a valid access key have presented, the motor lock start rotate, the green indicator light on the reader then illuminates, and an intermittent signal sounds. Please note that there […]
$527
A1DU controller for motor lock access point.
Overview of DU controller for Motor Lock Access Point.The DU firmware downloads (usually at the factory) in A1 controller and manages the motor lock for pass point.When a valid access key have presented, the motor lock start rotate, the green indicator light on the reader then illuminates, and an intermittent signal sounds. Please note that there […]
$315
DSB Firmware for Door ACS with Passage Blocking
Overview of DSB Firmware for Door, ACS with Passage BlockingThe DSB firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.A1 (with DSB firmware) blocks door passage when the C2 and GND contacts are closed.The same function can be implemented by DQ firmware.When a valid access card […]
$271
DUB Firmware for motor lock access point.
Overview of DUB Firmware for Motor Lock Access Point.The DUB firmware downloads (usually at the factory) in A1 controller and manages the motor lock for pass point.When a valid access key have presented, the motor lock start rotate, the green indicator light on the reader then illuminates, and an intermittent signal sounds. Please note that there […]
$301
A1TCQ controller for turnstile with card capture reader ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$1059
DIO micromodule: control of 2 “dry contacts” and control of a transistor switch
Micromodule for control of 2 "dry contacts" and a transistor switch with an open collector (U = 30 V DC, I = 1.5 A).
$17
APS1 addressable power supply
4-Channel Stabilized Power Supply Source: This unit features four channels, each providing stable power supply. These channels are organized into two categories: Two Independent Channels (1.8A Output): These channels are designed for supplying peripheral devices, ensuring reliable power distribution. Two Independent Channels for Controller and Battery Charger (AKB): These channels serve the controller and battery charger needs […]
$226
OctaWeb – application service for the Octagram ACS
The web service designed specifically for submitting applications and issuing passes for the Octagram ACS (Access Control System). This user-friendly platform streamlines the process, allowing individuals to conveniently submit their applications online and receive passes efficiently. Whether you're granting access to employees, visitors, or contractors, our web service ensures a seamless experience for both administrators […]
$369
GC – GPRS card communication channel
GC - GPRS card communication channel on the basis of GSM-module. External antenna. Maximal current 1A
$181
Omnilock 3 – electronic escutcheon for doorlock
The Omnilock 3 (OL3) is an easy-to-install door lock. It compatible with many type of door locks and can be set up in just 20 minutes. OL3 features a card reader and a motorized mechanism. It unlocks the door when you swipe a card or turn the handle from the inside. Additionally, the Omnilock 3 […]
$214
S – Firmware burglar alarm
S – firmware a little bit about this. Firmware for addressable controlling of burglary with 2 addressable data lines. There are two relays: one for sirens control and the other for connection with central observation post. System turn on/off by a key. Remote monitoring. Double communication channel. Management of automatics, with internal 96-reaction controller. S […]
$241
MRCA Air Conditioner Reservation and Rotation Module
MRCA Air Conditioner Rotation Module The MRC2 module contains two changeover relays, allowing connection of 2 air conditioners with a supply voltage of 220 V AC up to 10 A. MRC2 monitors each air conditioner circuit for open circuit, both in the on and off state, and outputs an alarm signal to the low-voltage contact […]
$60
TWT Interface converter Wiegand-26/Touch Memory
TWT is 2-channel bidirectional interfaces converter Wiegand-26/Touch Memory, which can convert data directly (emulation DS1990A) and inversely.
$104
4S2R – extension module for A1TC
4S2R - expansion module for controllers A1 with 2 relays and 4 sensors for use with TC firmware series (turnstile with card capture reader).
$65
LQB – ACS firmware for Elevator
Overview of LQB Firmware for Elevator Access Control SystemsThe LQB firmware designed for manage elevator access control of elevator operation both inside the cabin and on different floors using A1 controller and addressable DIR micromodules or MIR modules. A single controller can manage up to 11 floors, and the system provides access management for approximately […]
$1178
PLR4EH, an EM-Marin and HID card reader
PLR4EH encodes cards with 7-byte IDs: iButton (321765) / Wiegand-26 (321) / Wiegand-42 (32176). The reader allows to synchronise work with another reader when they are installed at a short distance from each other.
$114
2S2R – extension module for A1G
Expansion module for controllers A1 of 2 relay and 2 sensors for use with G-series firmware (opening door, boom barrier and gates with traffic lights in the both directions).
$62
4R – Exеtension module
Expansion module (4R) contains 4 normally open contacts, and it can be used for controllers: А1S/F/SF/SFE/H (burglary alartm, fire alarm, burglary fire alarm, burglary fire alarm with fire suppression system, automation and security management).
$84
CH2EH – Proximity Key Card Holder
<strong>CH2EH - Proximity Key Card Holder</strong> - specialized addressable terminal primarily designed <a href="https://octagram.us/wp-content/uploads/Octagram_hotel_en.pdf">for hotel installations
$126
MIR addressable module
MIR module: key reading, status indication and relay control. The reader connected to the MIR module can transmit data using the Wiegand 26 protocols. The MIR module provides a sound signal and 2 light indicators. The module is designed to protect the communication line and lines for connecting the reader from interference. The design of […]
$60
HT – Automation, Security, and Locks Management Firmware
Introducing HT – a dedicated firmware solution for the A1 controller, designed to manage up to four rooms in a hotel. The controller handles multiple functions, including door lock control, addressable burglar and fire alarms, fire-extinguishing systems, and automation. It supports two addressable lines with loop structure capabilities, up to 64 addresses, and can […]
$389
FE – Firmware for fire-alarm and automatic fire-extinguishing systems
FE Firmware for fire alarm and automatic fire-extinguishing systems, smoke removal and addressable warning. For A1 series controllers. In this system, there are two relays: one for siren, and the other for central observation post. 2 directions of gas fire-extinguishing. Automatic control and management; distant monitoring; dual communication channel; main/battery supply operation control. The fire […]
$244
CEO – IP Hub
CEO - IP-hub to connect the server to the controllers (recommended 32, max. - 255) via Ethernet/via cable line with LBUS/RS485 protocol.
$202
H – firmware for engineering equipment and lock management.
H - firmware for A1 platform, engineering equipment control, fire alarm and automatic door lock control. Direct connection of the lock reader. Siren relay control. Automatic monitoring and control; remote monitoring; dual communication channel; network/battery operation monitoring. A little bit about H – firmware. Addressable Burglar and Fire Alarm, Extinguishing, Automation. 2 addressable lines with […]
$389
KLU electronic USB-key
Licensed KLU USB-key is a compact device designed to provide information security.
$69
TC ACS firmware for turnstile with card capture reader
Firmware for access control system of turnstile with card capture reader, it allows access management through one-passage-point by identifiers’ code reading (iButton, proximity card (cardkey), PIN-code, biometrics). Emergence opening of point-passage.
$317
F-fire alarm firmware
The F Firmware designed for addressable control of fire alarm systems. It supports two addressable data lines and includes two relays: one for controlling sirens and another for connecting to a central observation post. The system can be activated or deactivated with a key and offers remote monitoring capabilities. It features dual communication channels and […]
$241
G ACS firmware for door, barrier or gate with traffic lights
G access control system firmware for door, barrier or gate management with traffic lights. This firmware allows the access controlling by identifiers' code reading of iButton, proximity card (cardkey), PIN-code and biometrics. Access Control for door, gate, barrier with two-way, two-color traffic lights control. 4000 users/events. 64 access schedules, 11 types of access, 3 time […]
$317
A1TCQB controller for turnstile with card capture reader ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$1297
DPB ACS firmware for door, boom barrier or gate with double identification
DPB - access control system ACS frimware for door, boom barrier or gate access management, with double identification, so entering/exiting can be managed by PIN-Code or ID-card. This firmware of series DP permits the access controlling of passage through one point by identifiers' code reading (iButton, cardkey, PIN-code and biometrics). Emergency opening of passage point […]
$904
DP ACS firmware for door, boom barrier or gate with double identification
DP - access control system ACS frimware for door, barrier or gate access management, with double identification, so entering/exiting can be managed by PIN-Code or ID-card. This firmware of series DP permits the access controlling of passage through one point by identifiers' code reading (iButton, cardkey, PIN-code and biometrics). Emergency opening of passage point door […]
$564
LQ – ACS firmware for elevator
Overview of LQ Firmware for Elevator Access Control SystemsThe LQ firmware designed for manage elevator access control of elevator operation both inside the cabin and on different floors using A1 controller and addressable DIR micromodules or MIR modules. A single controller can manage up to 11 floors, and the system provides access management for approximately […]
$940
T ACS firmware for turnstile with 2 operating relays
Firmware for access control system ACS of turnstile, it allows access management through one-passage-point by identifiers’ code reading (iButton, proximity card (cardkey), PIN-code, biometrics). Emergence opening of point-passage. Access control for turnstile, gate, barrier (2 relays).4000 users/events EEPROM. 64 access schedules, 11 types of access, 3 time intervals/day. Antipassback. 2 pass sensors controlling. 2 NO/NC […]
$262
TB ACS firmware for turnstile with 2 operating relays
Firmware for access control system ACS of turnstile, it allows access management through one-passage-point by identifiers’ code reading (iButton, proximity card (cardkey), PIN-code, biometrics). Emergence opening of point-passage. Access control for turnstile, gate, barrier (2 relays).64000 users/events EEPROM. 64 access schedules, 11 types of access, 3 time intervals/day. Antipassback. 2 pass sensors controlling. 2 NO/NC […]
$497
GB ACS firmware for door, barrier or gate with traffic lights
GB access control system firmware for door, barrier or gate management with traffic lights. This firmware allows the access controlling by identifiers' code reading of iButton, proximity card (cardkey), PIN-code and biometrics. Access Control for door, gate, barrier with two-way, two-color traffic lights control. 64000 users/events. 64 access schedules, 11 types of access, 3 time […]
$1013
A1DMQ controller supporting up to 32 door
Overview of A1DMQ controller, which supports up to 32 access pointsPowered by DMQ firmware, the access control system can manage up to 32 access points: doors, barriers, or gates using a single A1 controller.The A1DMQ controller features four Lmicro buses, with each bus capable of managing up to 16 access points. Integration is seamless, connecting […]
$326
DMQ firmware supporting up to 32 access points
Overview of DMQ firmware, which supports up to 32 access pointsPowered by DMQ firmware, the access control system can manage up to 32 access points: doors, barriers, or gates using a single A1 controller.The A1DMQ controller features four Lmicro buses, with each bus capable of managing up to 16 access points. Integration is seamless, connecting […]
$99
FB3 – automatic fire-extinguishing system cabinet with reserved place for RC100
4-directional automatic fire-extinguishing system panel FB3 – automatic fire-extinguishing system cabinet with reserved place for RC100; it have proximity-card (cardkey) reader, light and audio indication, controlling buttons of fire-extinguishing system, lock and tamper. There is a possibility to incorporate ABS1, A1, AKB12V/17A. it is design for 24-hour regime with climatic conditions: temperature 0 …+45 C, […]
$375
FB2 – automatic fire-extinguishing system cabinet
4-directional automatic fire-extinguishing system panel. This panel have proximity-card (cardkey) reader, light and audio indication, controlling buttons of fire-extinguishing system, lock and tamper. There is a possibility to incorporate ABS1, A1, AKB12V/17A. it is design for 24-hour regime with climatic conditions: temperature 0 …+45 C, relative humidity 90%.
$311
PB10 addressable power supply unit
Addressable power supply unit, which is designed on the basis of 4-channel stabilized power supply unit APS1 (APS5). Output voltage 13.5 V; 2 independent channels with output current 1.8 A (1.3 A) for peripheral devices supplying; Channels for power supplying of controller and accumulator charger; Peripheral device channels will be switched off, in the case […]
$248
A1DMQB controller supporting up to 32 door
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$534
DMQB firmware supporting up to 32 door
Overview of DMQB firmware, which supports up to 32 access pointsPowered by DMQB firmware, the access control system can manage up to 32 access points: doors, barriers, or gates using a single A1 controller.The A1DMQ controller features four Lmicro buses, with each bus capable of managing up to 16 access points. Integration is seamless, connecting […]
$307
A1DQ controller for door ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$583
DQ firmware for door ACS
Overview of DQ firmware for access point Access Control SystemsThe DQ firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.The keys are written to the controller's memory individually, significantly accelerating the writing process by several times. This memory usage algorithm also extends the controller's lifespan severalfold.When […]
$356
A1DQB controller for door ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$643
DQB firmware for door ACS
Overview of DQB firmware for access point Access Control SystemsThe DQB firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.The keys are written to the controller's memory individually, significantly accelerating the writing process by several times. This memory usage algorithm also extends the controller's lifespan severalfold.When […]
$416
DD Firmware for 2 door ACS
Overview of DD Firmware for 2 doors, barriers, or gates Access Control SystemsThe DD firmware writes (usually at the factory) in A1 controller and manages the 2 electromagnetic locks installed on the 2 door.When a valid access key have presented, the lock immediately releases, the green indicator light on the reader then illuminates, and an […]
$62
A1DD controller for 2 door ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$289
A1DDB controller for 2 door ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$497
DDB Firmware for 2 door ACS
Overview of DDB Firmware for 2 doors, barriers, or gates Access Control SystemsThe DDB firmware writes (usually at the factory) in A1 controller and manages the 2 electromagnetic locks installed on the 2 door.When a valid access key have presented, the lock immediately releases, the green indicator light on the reader then illuminates, and an […]
$270
A1D controller for door ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$280
D firmware for door ACS
Overview of D Firmware for Door, Barrier or Gate Access Control SystemsThe D firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.When a valid access card have presented, the lock immediately releases, the green indicator light on the reader then illuminates, and an intermittent signal sounds. […]
$53
A1DB controller for door ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$452
DB firmware for door ACS
Overview of DB Firmware Door, Barrier or Gate Access Control SystemsThe DB firmware downloads (usually at the factory) in A1 controller and manages the electromagnetic lock installed on the door.When a valid access card have presented, the lock immediately releases, the green indicator light on the reader then illuminates, and an intermittent signal sounds. After […]
$225
A1DDQ controller for 2 doors ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$762
DDQ Firmware for 2 access points ACS
Overview of DDQ Firmware for 2 access points Access Control SystemsThe DDQ firmware writes (usually at the factory) in A1 controller and manages the 2 electromagnetic locks installed on the 2 door.The keys are written to the controller's memory individually, significantly accelerating the writing process by several times. This memory usage algorithm also extends the […]
$535
A1DDQB controller for 2 doors ACS
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$821
DDQB Firmware for 2 doors ACS
Overview of DDQB Firmware for 2 access points Access Control SystemsThe DDQB firmware writes (usually at the factory) in A1 controller and manages the 2 electromagnetic locks installed on the 2 door.The keys are written to the controller's memory individually, significantly accelerating the writing process by several times. This memory usage algorithm also extends the […]
$594
DC firmware for sluice systems
Overview of DC Firmware for Two-Door Sluice SystemsThe DC firmware writes (usually at the factory) in A1 controller and enables precise control over two-door sluice systems. A single A1 controller, powered by DC firmware, manages one part of the sluice or the electromagnetic locks installed on one of the two sequential doors. To fully control […]
$232
A1DC controller for sluice systems
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$459
DCB firmware for sluice systems
Overview of DCB Firmware for Two-Door Sluice SystemsThe DCB firmware enables precise control over two-door sluice systems. A single A1 controller, powered by DCB firmware, manages one part of the sluice or the electromagnetic locks installed on one of the two sequential doors. To fully control the airlock, two A1DCB controllers are required, ensuring that both […]
$677
A1DCB controller for sluice systems
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$904
A1LQB Controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$1404
FEB – Firmware for fire-alarm and automatic fire-extinguishing systems
FEB Firmware for fire alarm and automatic fire-extinguishing systems, smoke removal and addressable warning. For A1 series controllers. In this system, there are two relays: one for siren, and the other for central observation post. 2 directions of gas fire-extinguishing. Automatic control and management; distant monitoring; dual communication channel; main/battery supply operation control. The fire […]
$271
FB-fire alarm firmware
The F Firmware designed for addressable control of fire alarm systems. It supports two addressable data lines and includes two relays: one for controlling sirens and another for connecting to a central observation post. The system can be activated or deactivated with a key and offers remote monitoring capabilities. It features dual communication channels and […]
$271
SB – Firmware burglar alarm
SB – firmware a little bit about this. Firmware for addressable controlling of burglary with 2 addressable data lines. There are two relays: one for sirens control and the other for connection with central observation post. System turn on/off by a key. Remote monitoring. Double communication channel. Management of automatics, with internal 96-reaction controller. S […]
$271
A1FEB controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$497
A1FE controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$470
A1FB controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$497
A1F controller
A1 Controller functions can be changed by direct downloading of appropriate firmware (100 kB file) from PC via Ethernet.
$461
CE – IP hub card
CE - IP hub, card for connection with Ethernet by cable LBUS up to 255 controllers.
$138
RC100 – Control and display unit (Remote control)
The two-line display enables comprehensive insights into the location and status of every monitoring point and group.
$391
